Upcoming Training

25 - 26 Nov 2024

2 days, Mon & Tue 8:15 AM - 4:00 PM

Formally known as BB1M. This assessment will test the delegate's knowledge of building modular jointing chambers. This module covers the excavation, base preparation, installation of the modular rings, ironwork and duct entries.

25 - 26 Nov 2024

2 days, Mon & Tue 8:15 AM - 4:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

25 - 26 Nov 2024

2 days , Mon - Tue , 8:15am - 4:00pm

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

25 - 29 Nov 2024

1 week, weekdays 8:30 AM - 4:00 PM

This module consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

25 - 26 Nov 2024

2 days Mon & Tue 08:30AM - 04:00PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

25 - 26 Nov 2024

2 days Mon & Tue 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

25 - 27 Nov 2024

3 days Mon, Tue & Wed 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

25 - 29 Nov 2024

1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

26 - 27 Nov 2024

2 days Tue & Wed 08:30AM - 04:00PM

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

Wed 27 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is assessment only, no additional training is provided. This assessment consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

Wed 27 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is assessment only, no additional training is provided. This assessment consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

Wed 27 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 27 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 27 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Wed 27 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

28 - 29 Nov 2024

2 days, Thu & Fri 8:15 AM - 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

28 - 29 Nov 2024

2 Days

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

28 - 29 Nov 2024

2 Days Thu & Fri 08:30AM - 04:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Thu 28 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

Fri 29 Nov 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

Mon 2 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

2 - 4 Dec 2024

3 days Mon, Tue & Wed 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 2 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This assessment will test the delegate's knowledge and ability to complete FTTP surveys using current working practices, quality standards, planning policies and One Fibre Network components.

Mon 2 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Mon 2 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Mon 2 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

3 - 4 Dec 2024

2 Days

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Tue 3 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

3 - 4 Dec 2024

2 days Tue & Wed 8:30 AM – 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

Tue 3 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Tue 3 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

Wed 4 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the telecommunications industry, both permanent and temporary, at all levels including operatives, supervisors and management.

Wed 4 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 4 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

4 - 6 Dec 2024

3 days Wed-Fri, 08:30AM - 04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

Wed 4 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Thu 5 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Fri 6 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 6 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 6 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

9 - 10 Dec 2024

2 days, Mon & Tue 8:15 AM - 4:00 PM

Formally known as BB1M. This assessment will test the delegate's knowledge of building modular jointing chambers. This module covers the excavation, base preparation, installation of the modular rings, ironwork and duct entries.

Mon 9 Dec 2024

8:15 AM - 4:00 PM (7 hours 45 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

9 - 13 Dec 2024

5 Day course 8.30am to 16.00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

9 - 13 Dec 2024

5 days , Mon - Fri , 8:30 am - 4:00 pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

9 - 13 Dec 2024

5 Day Course 8.30am to 16.00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

Mon 9 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 9 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

9 - 10 Dec 2024

2 days Mon & Tue 8:30 AM – 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

9 - 11 Dec 2024

3 Days 8.30am to 16.00pm

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 9 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

10 - 12 Dec 2024

1 week, Mon, Tue & Wed 8:15 AM - 4:00 PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

11 - 13 Dec 2024

3 Days 8.30am to 16.00pm

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

12 - 13 Dec 2024

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

12 - 13 Dec 2024

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Fri 13 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 13 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

The module assesses the delegate's knowledge and ability to increase space in the upper pole envelope by moving the top bass step downwards in line with the current PIA terms and conditions and also to understand the new upper envelope of space and its measurement.

Fri 13 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

16 - 18 Dec 2024

3 days, Mon, Tue & Wed 8:15 AM - 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

16 - 17 Dec 2024

2 days Mon & Tue 8:30 AM – 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

16 - 18 Dec 2024

1 week, Mon, Tue, Wed & Fri 8:30 AM - 4:00 PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

Mon 16 Dec 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

18 - 20 Dec 2024

3 days Wed-Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 6 Jan 2025

8:15 AM - 4:00 PM (7 hours 45 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

6 - 7 Jan 2025

2 days Mon & Tue 08:30AM-04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

6 - 8 Jan 2025

3 days Mon - Wed, 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Tue 7 Jan 2025

8:15 AM - 4:00 PM (7 hours 45 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 7 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

8 - 9 Jan 2025

2 days Wed & Thu 8:30 AM – 4:00 PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

9 - 10 Jan 2025

2 days, Thu & Fri 8:30 AM – 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

9 - 10 Jan 2025

2 days Thu & Fri 8:30 AM – 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

Fri 10 Jan 2025

8:15 AM - 4:00 PM (7 hours 45 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Fri 10 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Mon 13 Jan 2025

8:15 AM - 4:00 PM (7 hours 45 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 13 Jan 2025

8:15 AM - 4:00 PM (7 hours 45 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

13 - 14 Jan 2025

2 days Mon & Tue 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

13 - 14 Jan 2025

2 Days Mon & Tue 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

Mon 13 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 13 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 13 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 13 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 13 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 14 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

14 - 15 Jan 2025

2 days , Tue - Wed , 8 : 15 am - 4 :00 pm

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

14 - 15 Jan 2025

2 days , Tue - Wed , 8:15am - 4 :00pm

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

14 - 15 Jan 2025

2 days Tue & Wed 8:30 AM – 4:00 PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

Tue 14 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Wed 15 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as DB1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of Clearing duct blockages.

Wed 15 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Wed 15 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

20 - 24 Jan 2025

1 week, weekdays 8:30 AM - 4:00 PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

20 - 24 Jan 2025

1 week, weekdays 8:30 AM - 4:00 PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

20 - 24 Jan 2025

5 days , Mon- Fri , 8:30 am - 4 :00pm

This qualification is aimed at learners aged 16 and above who would like to gain the knowledge and skills required during their initial training within the network infrastructure (communications cabling) industry for specific job roles. It is also for those who work within the telecoms industry and wish to further develop their knowledge and skills.

Mon 20 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 20 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 20 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.