Upcoming Training

22 - 24 Apr 2025

3 days Tue-Thu. 08:30AM - 04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

22 - 23 Apr 2025

2 days Tue & Wed 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Tue 22 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 22 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 22 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course contains training prior to taking the assessment . This accreditation is a mandatory requirement for Partners who have team members registered under Survey/Planning based activities. This will test the delegate’s knowledge of undertaking a survey and the factors that must be considered, Environmental obligations, Obligation under the Telecommunications Code, Obligation under the Regulations and Obligation under the Town & Country Planning acts.

Tue 22 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 22 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Wed 23 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 23 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 23 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 23 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

24 - 25 Apr 2025

2 days , Thu - Fri , 8:30am - 4:00pm

Formally known as BB1M. This assessment will test the delegate's knowledge of building modular jointing chambers. This module covers the excavation, base preparation, installation of the modular rings, ironwork and duct entries.

24 - 25 Apr 2025

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Thu 24 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

Fri 25 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 25 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 25 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 25 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 25 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Fri 25 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

28 Apr 2025 - 2 May 2025

1 week Mon-Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

28 Apr 2025 - 2 May 2025

1 week Mon - Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

28 Apr 2025 - 2 May 2025

1 week Mon - Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

28 Apr 2025 - 2 May 2025

1 week Mon-Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

Mon 28 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 28 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

28 - 29 Apr 2025

2 days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

28 - 29 Apr 2025

2 Days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

28 - 30 Apr 2025

3 days Mon - Wed, 08:30AM - 04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

28 - 29 Apr 2025

Over 2 Days Mon & Tue 08:30AM-04:00PM

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

Mon 28 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

28 Apr 2025 - 2 May 2025

1 week, weekdays 8:30 AM - 4:00 PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

Tue 29 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

Wed 30 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Wed 30 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 30 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 30 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Wed 30 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

1 - 2 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Thu 1 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Fri 2 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as DB1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of Clearing duct blockages.

Fri 2 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation covers one module: Cable Installation over LV Power Crossings. Learners are provided with the knowledge and skills to install cables over low voltage power crossings. This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment.

Fri 2 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Tue 6 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Tue 6 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This assessment will test the delegate's knowledge of and ability to install OFN cables in the U/G network where hand rodding is the chosen option, using current working practices and quality standards. It also covers fitting a no drill Mobra or flat bar for a CBT. Support, restraint and labelling will also be checked, this is to ensure understanding of the Quality standards

6 - 7 May 2025

2 days Tue & Wed 08:30AM-04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

6 - 7 May 2025

2 days Tue & Wed 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

Tue 6 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 6 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Tue 6 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

Wed 7 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 7 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 8 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 8 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as FCFW1. This module checks the Delegates understanding & ability to complete frame and cover renewal in the footway of cover no 2, 4, 6,110, 111, cover carriageway 4 & covers precinct using current working practices and quality standards.

8 - 9 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

8 - 9 May 2025

2 days , Thu - Fri , 8:30am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

8 - 9 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

8 - 9 May 2025

Over 2 days Thu & Fri 08:30AM starts

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

Thu 8 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Thu 8 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation provides learners with an essential foundation in relevant matters of providing Banksman Ground Support Person for Elevating Platform and Mobile Elevating Work Platform. It is suitable for learners who already work in the construction or utilities industries or learners looking to work in construction or the utilities. This accreditation sets out the skills, knowledge and understanding to support the operator to manoeuvre an EP or an MEWP in a restricted space and working at height.

12 - 16 May 2025

5 days , Mon - Fri , 8:30am- 4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

12 - 16 May 2025

5 days , Mon - Fri , 8:30am-4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

12 - 16 May 2025

5 days , Mon - Fri , 8:30am - 4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

12 - 13 May 2025

2 days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 12 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Tue 13 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

14 - 15 May 2025

2 days Wed & Thu 08:30AM -04:00PM

This module consists of two parts: a questionnaire and a practical assessment. It will check the Delegate's understanding & ability in the use of equipment and methods associated with heavy cabling and Sub-duct Mono-bore 5 (SDMB5) installation/repair. This will include setting up a site for cabling and carrying out heavy cabling/SDMB5 in the access network.

Wed 14 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 14 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 14 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 15 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 15 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 15 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 15 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 16 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Fri 16 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

19 - 23 May 2025

1 week Mon - Fri 08:30AM -04:00PM

This qualification is aimed at learners aged 16 and above who would like to gain the knowledge and skills required during their initial training within the network infrastructure (communications cabling) industry for specific job roles. It is also for those who work within the telecoms industry and wish to further develop their knowledge and skills.

19 - 23 May 2025

1 week Mon - Fri 08:30AM - 04:00PM

This module consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

19 - 23 May 2025

1 week Mon-Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

19 - 23 May 2025

1 week Mon-Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

19 - 20 May 2025

2 Days , Mon - Tue , 8:30am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

19 - 21 May 2025

3 days Tue - Thu, 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

19 - 23 May 2025

5 days Mon - Fri 08:30AM - 04:00PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

Tue 20 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

Wed 21 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Wed 21 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

22 - 23 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Thu 22 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 22 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

22 - 23 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

22 - 27 May 2025

3 days Thu-Fri & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Fri 23 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 27 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 27 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 27 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

27 - 28 May 2025

2 Days , Tue - Wed , 8:30am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

28 - 29 May 2025

2 days , Wed - Thu , 8:30am - 4:00pm

Formally known as BB1M. This assessment will test the delegate's knowledge of building modular jointing chambers. This module covers the excavation, base preparation, installation of the modular rings, ironwork and duct entries.

Wed 28 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

29 - 30 May 2025

2 days Thu & Fri 08:30AM-04:00PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

29 - 30 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Fri 30 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as CD1. This assessment will test the delegate's knowledge of core drilling jointing chambers. This module covers the core drilling of modular, brick and concrete (reinforced and unreinforced) jointing chambers for the installation of Duct 54, 56 and small ducts.

2 - 6 Jun 2025

Duration 1 week Mon - Fri 08:30AM-04:00PM

This qualification is aimed at learners aged 16 and above who would like to gain the knowledge and skills required during their initial training within the network infrastructure (communications cabling) industry for specific job roles. It is also for those who work within the telecoms industry and wish to further develop their knowledge and skills.

2 - 3 Jun 2025

2 days Mon - Tue 08:30 - 04:00PM

This module consists of three parts, a questionnaire and two practical sessions. It will check the delegates understanding & ability to complete O/H (Overhead) fibre cabling using the correct working practices and quality standards.

2 - 6 Jun 2025

5 Days , Mon - Fri , 8:30 am - 4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

2 - 6 Jun 2025

5 Days , Mon - Fri , 8:30 am - 4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

2 - 6 Jun 2025

5 days , Mon - Fri , 8:30 am - 4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

2 - 6 Jun 2025

5 Day s, Mon - Fri , 8:30 am - 4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

2 - 3 Jun 2025

2 days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

2 - 6 Jun 2025

5 days Mon-Fri 08:30AM - 04:00PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

4 - 5 Jun 2025

2 days Wed & Thu 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Wed 4 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

5 - 6 Jun 2025

2 Days Thu & Fri 08:30AM - 04:00PM

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works. 2 Day version for novice delegates new to Telecommunications

Fri 6 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 6 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

9 - 10 Jun 2025

2 days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

9 - 13 Jun 2025

1 week Mon-Fri 08:30AM - 04:00PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

10 - 12 Jun 2025

3 days Mon-Wed 08:30AM - 04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

11 - 12 Jun 2025

2 days Wed & Thu 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Wed 11 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is assessment only, no additional training is provided. This assessment consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

Thu 12 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 13 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Fri 13 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

16 - 18 Jun 2025

3 days Mon-Wed 08:30AM - 04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

16 - 17 Jun 2025

2 days, 8:30 AM - 4:00 PM

Formally known as DL1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of installing Duct 54 and 56. The module covers the installation of single way and 2 way duct only. For laying multi-way duct exceeding 2 ways the operative will require Duct Laying 2 for which the Q021 module is a pre-requisite.

16 - 17 Jun 2025

2 Days , Mon - Tue , 8:30am - 4:00 pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

16 - 17 Jun 2025

2 days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

16 - 18 Jun 2025

3 days Mon - Wed, 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 16 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Mon 16 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding and skills in the safe use of abrasive wheels.

17 - 18 Jun 2025

2 days Tue & Wed 08:30AM - 04:00Pm

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Wed 18 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 18 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 18 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as DB1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of Clearing duct blockages.

Wed 18 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

19 - 20 Jun 2025

2 days Thu & Fri 08:30AM - 04:00PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

19 - 20 Jun 2025

2 days , Thu - Fri , 8:30am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding and skills in the safe use of abrasive wheels.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding and skills in the safe use of abrasive wheels.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding and skills in the safe use of abrasive wheels.

23 - 24 Jun 2025

2 Days Mon & Tue 08:30AM - 04:00PM

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works. 2 Day version for novice delegates new to Telecommunications

Mon 23 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

It will check the Delegates understanding & ability to complete the provision of Lightweight Aerial Cabling, including the termination on wooden poles using current working practices and quality standards.

23 - 27 Jun 2025

Duration 5 Days , Mon - Fri , 8:30 am - 4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

23 - 27 Jun 2025

1 week Mon - Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

23 - 27 Jun 2025

5 Days , Mon - Fri , 8:30am - 4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

23 - 27 Jun 2025

1 week Mon - Fri 08:30AM - 04:00PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

23 - 27 Jun 2025

1 week Mon-Fri 08:30Am - 04:00PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

24 - 25 Jun 2025

Duration 2 days Tue & Wed 08:00 AM - 04:00 PM

This assessment will test the delegates knowledge of heavyweight aerial cabling, including the termination on wooden poles.

25 - 26 Jun 2025

2 days , Wed - Thu , 8:30 am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

25 - 27 Jun 2025

3 days Wed - Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Fri 27 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

30 Jun 2025 - 2 Jul 2025

3 days Mon-Wed 08:30AM - 04:00PM

3 day course covering the theory and best practice of blown fibre installation.

30 Jun 2025 - 4 Jul 2025

5 days , Mn - Fri , 8:30am - 4:00pm

This module consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

30 Jun 2025 - 4 Jul 2025

5 days , Mon - Fri , 8:30 am - 4:00 pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

30 Jun 2025 - 4 Jul 2025

5 Days , Mon - Fri , 8:30 am - 4:00 pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

30 Jun 2025 - 1 Jul 2025

2 Day Course , Mon - Tue , 8:30am - 4:00pm

Formally known as BB1M. This assessment will test the delegate's knowledge of building modular jointing chambers. This module covers the excavation, base preparation, installation of the modular rings, ironwork and duct entries.

Mon 30 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The module assesses the delegate's knowledge and ability to increase space in the upper pole envelope by moving the top bass step downwards in line with the current PIA terms and conditions and also to understand the new upper envelope of space and its measurement.

Tue 1 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The module assesses the delegate's knowledge and ability to increase space in the upper pole envelope by moving the top bass step downwards in line with the current PIA terms and conditions and also to understand the new upper envelope of space and its measurement.

Wed 2 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as CD1. This assessment will test the delegate's knowledge of core drilling jointing chambers. This module covers the core drilling of modular, brick and concrete (reinforced and unreinforced) jointing chambers for the installation of Duct 54, 56 and small ducts.

Thu 3 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 3 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 3 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Fri 4 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the telecommunications industry, both permanent and temporary, at all levels including operatives, supervisors and management.

7 - 8 Jul 2025

2 days Mon & Tue, 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

7 - 8 Jul 2025

2 Days Mon - Tue 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

7 - 8 Jul 2025

2 Days Mon & Tue 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

7 - 8 Jul 2025

2 days, 8:30 AM - 4:00 PM

Formally known as DL1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of installing Duct 54 and 56. The module covers the installation of single way and 2 way duct only. For laying multi-way duct exceeding 2 ways the operative will require Duct Laying 2 for which the Q021 module is a pre-requisite.