January 2025
Fri 31 Jan 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.
SA020 - Working Safely in Single and Multi-Occupancy Dwellings Including Buildings
PQMS Bedworth (CV12 0NE)
Fri 31 Jan 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.
February 2025
S008 - PIA Overhead Cable Installation
PQMS Livingston (EH54 8AY)
3 - 5 Feb 2025
3 days, Mon, Tue & Wed 8:15 AM - 4:00 PM
The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.
Mon 3 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.
N028 - One Fibre Network Cabling in the Underground Network
PQMS Bury (BL9 6HD)
Mon 3 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This assessment will test the delegate's knowledge of and ability to install OFN cables in the U/G network where hand rodding is the chosen option, using current working practices and quality standards. It also covers fitting a no drill Mobra or flat bar for a CBT. Support, restraint and labelling will also be checked, this is to ensure understanding of the Quality standards
3 - 7 Feb 2025
1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM
The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.
3 - 7 Feb 2025
1 week Mon-Fri 08:30AM - 04:00PM
The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.
3 - 7 Feb 2025
1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM
The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.
3 - 7 Feb 2025
1 week Mon - Fri, 08:30AM - 04:00PM
The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Bedworth (CV12 0NE)
Mon 3 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
Mon 3 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.
Tue 4 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Bury (BL9 6HD)
Tue 4 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Bedworth (CV12 0NE)
Tue 4 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Livingston (EH54 8AY)
Tue 4 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
4 - 6 Feb 2025
3 days Tue - Thu 08:30AM - 04:00PM
This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.
SA020 - Working Safely in Single and Multi-Occupancy Dwellings Including Buildings
PQMS Bury (BL9 6HD)
Tue 4 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.
NRSWA O1 - Signing, lighting and guarding
PQMS Pulborough (RH20 1DL)
Wed 5 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
Wed 5 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Bury (BL9 6HD)
Wed 5 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Livingston (EH54 8AY)
Wed 5 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
NRSWA S1 - Monitoring signing, lighting and guarding
PQMS Bury (BL9 6HD)
Thu 6 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.
Thu 6 Feb 2025
8:30 AM - 4:00 PM (7 hours 30 minutes)
Formally known as CD1. This assessment will test the delegate's knowledge of core drilling jointing chambers. This module covers the core drilling of modular, brick and concrete (reinforced and unreinforced) jointing chambers for the installation of Duct 54, 56 and small ducts.
6 - 7 Feb 2025
2 days Thu & Fri 8:30 AM – 4:00 PM
The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.
6 - 7 Feb 2025
2 days Thu & Fri 08:30AM - 04:00PM
The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.