Upcoming Training

20 - 23 May 2024

4 days, Mon, Tue, Wed & Thu 8:30 AM - 4:00 PM

This course includes refresher training and ACS Assessments

20 - 21 May 2024

2 Days Mon, Tue 8:30 AM – 4:00 PM

This module is essential for anyone carrying out Fibre to The Premises (FTTP), Lead to Cash (L2C), Overhead (OH) and Underground (UG) Provision Step 1

20 - 24 May 2024

1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM

This module consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

20 - 24 May 2024

1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

20 - 24 May 2024

1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

20 - 24 May 2024

1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

20 - 24 May 2024

1 week, Mon, Tue, Wed, Thu & Fri 8:30 AM – 4:00 PM

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

20 - 22 May 2024

3 Days Mon, Tue, Wed 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

20 - 22 May 2024

3 Days Mon, Tue & Wed 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 20 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Mon 20 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Mon 20 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Mon 20 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

20 - 21 May 2024

2 days, 8:30 AM - 4:00 PM

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

20 - 21 May 2024

2 days, 8:30 AM - 4:00 PM

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

Tue 21 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This assessment will test the delegate's knowledge of and ability to install OFN cables in the U/G network where hand rodding is the chosen option, using current working practices and quality standards. It also covers fitting a no drill Mobra or flat bar for a CBT. Support, restraint and labelling will also be checked, this is to ensure understanding of the Quality standards

21 - 22 May 2024

2 Days Tue, Wed 08:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

21 - 23 May 2024

3 Days, Tue, Wed, Thu 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Tue 21 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

The module assesses the delegate's knowledge and ability to increase space in the upper pole envelope by moving the top bass step downwards in line with the current PIA terms and conditions and also to understand the new upper envelope of space and its measurement.

22 - 23 May 2024

2 days, Wed & Thu 8:30 AM - 4:00 PM

This course will check the Delegates understanding & ability to complete the provision and renewal of Dropwire, over a road crossing as a 'singleton worker'. This module also includes an observation exercise based around quality standards and a practical covering the termination of Dropwire and underground cable, on various Box Connections. All tasks must be completed using current working practices and quality standards.

Wed 22 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Wed 22 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is assessment only, no additional training is provided. This assessment consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.

Wed 22 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This assessment will check the Delegate's understanding & ability of providing a FTTP customer's fibre from the CSP (Customer Service Point) to the ONT (Optical Network Termination) and the fitting of the equipment in the customer's premises including data extension wiring if applicable.

Wed 22 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 22 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

22 - 23 May 2024

2 Days Wed, Thu 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

23 - 24 May 2024

2 days, Thu & Fri 8:30 AM - 4:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

23 - 24 May 2024

2 days

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Thu 23 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Thu 23 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Thu 23 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Fri 24 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 24 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 24 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

28 - 29 May 2024

2 Days Tue, Wed 8:30 AM – 4:00 PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This assessment will test the delegate's knowledge of and ability to install OFN cables in the U/G network where hand rodding is the chosen option, using current working practices and quality standards. It also covers fitting a no drill Mobra or flat bar for a CBT. Support, restraint and labelling will also be checked, this is to ensure understanding of the Quality standards

28 - 30 May 2024

3 Days Tue, Wed, Thu 8:30 AM – 4:00 PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

28 - 30 May 2024

3 Days Tue, Wed, Thu 8:30 AM – 4:00 PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 28 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation covers one module: Safe Moving and Handling. Learners are provided with the knowledge for safe moving and handling. This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding in Safe Moving and Handling techniques.

Wed 29 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 29 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 29 May 2024

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.