Upcoming Training

7 - 8 Jul 2025

2 days Mon & Tue, 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Mon 7 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

It will check the Delegates understanding & ability to complete the provision of Lightweight Aerial Cabling, including the termination on wooden poles using current working practices and quality standards.

7 - 8 Jul 2025

2 Days Mon - Tue 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

7 - 8 Jul 2025

2 Days Mon & Tue 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

Mon 7 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 7 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 7 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as FCFW1. This module checks the Delegates understanding & ability to complete frame and cover renewal in the footway of cover no 2, 4, 6,110, 111, cover carriageway 4 & covers precinct using current working practices and quality standards.

Mon 7 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

8 - 9 Jul 2025

Duration Duration 2 days Thurs & Fri 08:00 AM - 04:00 PM

This assessment will test the delegates knowledge of heavyweight aerial cabling, including the termination on wooden poles.

Tue 8 Jul 2025

Duration 1 day Tuesday 8th July 08:30 - 04:00PM

This module consists of three parts, a questionnaire and two practical sessions. It will check the delegates understanding & ability to complete O/H (Overhead) fibre cabling using the correct working practices and quality standards.

Tue 8 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 8 Jul 2025

1 day version

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

Wed 9 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

9 - 10 Jul 2025

2 days , Wed - Thu , 8:30am-4:00pm

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

9 - 10 Jul 2025

2 days , Wed - Thu , 8:30am-4:00pm

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

9 - 10 Jul 2025

2Day - Wed/Thu 8:30 - 4:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

9 - 11 Jul 2025

3 days Wed-Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Wed 9 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

10 - 11 Jul 2025

2 days Wed & Thu 08:30AM - 04:00PM

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

Thu 10 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 10 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Fri 11 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Fri 11 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Fri 11 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This module consists of a questionnaire and practical assessment. Content: This assessment will test the delegate's knowledge of and ability to install underground cables or drawrope where hand rodding is the chosen option.

Fri 11 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 11 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation covers one module: Cable Installation over LV Power Crossings. Learners are provided with the knowledge and skills to install cables over low voltage power crossings. This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment.

Fri 11 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

14 - 15 Jul 2025

2 days Mon & Tue 08:30AM - 4:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

14 - 18 Jul 2025

Duration 1 week Mon - Fri 08:30AM-04:00PM

This qualification is aimed at learners aged 16 and above who would like to gain the knowledge and skills required during their initial training within the network infrastructure (communications cabling) industry for specific job roles. It is also for those who work within the telecoms industry and wish to further develop their knowledge and skills.

14 - 18 Jul 2025

5 days , Mon - Fri , 8:30am- 4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

14 - 18 Jul 2025

5 days , Mon - Fri , 8:30am- 4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

14 - 16 Jul 2025

3 days ,Mon - Wed , 8:30am - 4:00pm

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

14 - 16 Jul 2025

3 days Mon - Wed 08:30AM -04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

14 - 16 Jul 2025

3 days , Mon - Wed , 8:30am - 4:00pm

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

14 - 18 Jul 2025

1 week Mon-Fri 08:30AM - 04:00PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

Tue 15 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This assessment will test the delegate's knowledge of and ability to install OFN cables in the U/G network where hand rodding is the chosen option, using current working practices and quality standards. It also covers fitting a no drill Mobra or flat bar for a CBT. Support, restraint and labelling will also be checked, this is to ensure understanding of the Quality standards

Wed 16 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 16 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 16 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as CD1. This assessment will test the delegate's knowledge of core drilling jointing chambers. This module covers the core drilling of modular, brick and concrete (reinforced and unreinforced) jointing chambers for the installation of Duct 54, 56 and small ducts.

16 - 17 Jul 2025

2 days Wed-Thu 08:30AM - 04:00 PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Thu 17 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Thu 17 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

17 - 18 Jul 2025

2 days , Thu & Fri , 8:30am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

Fri 18 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 18 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Fri 18 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

21 - 25 Jul 2025

5 days , Mon- Fri , 8:30am- 4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

21 - 25 Jul 2025

5 days , Mon - Fri , 8:30am-4:00pm

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

21 - 25 Jul 2025

5 days , Mon - Fri , 8:30am-4:00pm

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

21 - 25 Jul 2025

5 days , Mon - Fri , 8:30am-4:00am

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

21 - 22 Jul 2025

2 Days , Mon & Tue 8:30am - 4:00pm

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

21 - 23 Jul 2025

3 day s, Mon - Wed , 8:30am - 4:00pm

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Mon 21 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

Mon 21 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 22 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 22 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 22 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as DB1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of Clearing duct blockages.

Tue 22 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

23 - 24 Jul 2025

2 days, 8:30 AM - 4:00 PM

Formally known as DL1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of installing Duct 54 and 56. The module covers the installation of single way and 2 way duct only. For laying multi-way duct exceeding 2 ways the operative will require Duct Laying 2 for which the Q021 module is a pre-requisite.

23 - 24 Jul 2025

2 days , Wed - Thu , 8:30am- 4:00pm

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

24 - 25 Jul 2025

2 days Thu & Fri 08:30AM - 04:00PM

This module consists of three parts, a questionnaire and two practical sessions. It will check the delegates understanding & ability to complete O/H (Overhead) fibre cabling using the correct working practices and quality standards.

Thu 24 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

Thu 24 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Thu 24 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation sets out the requirements for implementing thesafe working practices for Leaning Ladder & Flat RoofAccreditation to candidates where works is undertaken in dwellings, including multi occupancy units.

Fri 25 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as DB1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of Clearing duct blockages.

Fri 25 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Fri 25 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Fri 25 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation is to provide learners with the necessary information to rescue individuals who become suspended on the pole for whatever reason while working on the pole at height. The purpose of this accreditation is to provide learners with the necessary information to undertake the rescue operation by climbing the pole. NB - this does NOT allow the learner to forward deliver this course.

Mon 28 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 28 Jul 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Mon 28 Jul 2025

1 day 08:30AM - 04:00PM

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.