Upcoming Training

22 - 23 May 2025

2 days Thu & Fri 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

22 - 27 May 2025

3 days Thu-Fri & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

Fri 23 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

Tue 27 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Tue 27 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 28 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 28 May 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

29 - 30 May 2025

2 days Thu & Fri 08:30AM-04:00PM

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

2 - 6 Jun 2025

Duration 1 week Mon - Fri 08:30AM-04:00PM

This qualification is aimed at learners aged 16 and above who would like to gain the knowledge and skills required during their initial training within the network infrastructure (communications cabling) industry for specific job roles. It is also for those who work within the telecoms industry and wish to further develop their knowledge and skills.

2 - 6 Jun 2025

5 days Mon-Fri 08:30AM - 04:00PM

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

Tue 3 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

Wed 4 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Formally known as CD1. This assessment will test the delegate's knowledge of core drilling jointing chambers. This module covers the core drilling of modular, brick and concrete (reinforced and unreinforced) jointing chambers for the installation of Duct 54, 56 and small ducts.

Fri 6 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

9 - 13 Jun 2025

Duration Duration 1 week Mon - Fri 08:30AM-04:00PM

This qualification is aimed at learners aged 16 and above who would like to gain the knowledge and skills required during their initial training within the network infrastructure (communications cabling) industry for specific job roles. It is also for those who work within the telecoms industry and wish to further develop their knowledge and skills.

9 - 10 Jun 2025

2 days Mon & Tue 08:30AM - 04:00PM

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

11 - 12 Jun 2025

2 days Wed & Thu 08:30AM - 04:00PM

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

Thu 12 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the telecommunications industry, both permanent and temporary, at all levels including operatives, supervisors and management.

Fri 13 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

Provides candidates with the knowledge to identify hazards and risks and to work safely in single and multi-occupancy dwellings, including buildings according to industry standards and practices.

16 - 18 Jun 2025

3 days Mon-Wed 08:30AM - 04:00PM

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures and safe working practices.

Mon 16 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding and skills in the safe use of abrasive wheels.

Tue 17 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

Tue 17 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

17 - 18 Jun 2025

2 Days Tue & Wed 08:30AM - 04:00PM

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

Wed 18 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is assessment only, no additional training is provided. This assessment consists of two parts, a questionnaire and a practical session. It will check the delegates understanding & ability to complete provision of the UG (Underground) and OH (Overhead) network from an Aggregation Node to the CBT (Connectorised Block Terminal) using current working practices and quality standards.