Course List

.

This qualification will provide delegates with the knowledge of the hazards, including potential risks involved when working in an SDU. It will test the delegates knowledge, skills and understanding of the dangers associated with the work, and the safety precautions required. It will ensure that they are suitable trained and accredited to the National Occupational Standard (NOS)

This qualification will provide delegates with the knowledge of the hazards, including potential risks involved when working in an MDU. It will test the delegates knowledge, skills and understanding of the dangers associated with the work, and the safety precautions required. It will ensure that they are suitable trained and accredited to the National Occupational Standard (NOS)

This qualification will provide delegates with the knowledge of the hazards, including potential risks involved when working in an MDU. It will test the delegates knowledge, skills and understanding of the dangers associated with the work, and the safety precautions required. Additionally, delegates will also leave with the required knowledge and skills to undertake fire stopping installations and use appropriate fireproof fixings. It will ensure that they are suitable trained and accredited to the NOS

The CABWI Level 2 Award in Working in Low Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in low risk confined spaces as part of their job role.

The CABWI Level 2 Award in Working in High Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in high risk confined spaces as part of their job role.

The CABWI Level 2 Award in Working in Medium Risk Confined Spaces allows learners to demonstrate the skills and knowledge required by those who need to work in medium risk confined spaces as part of their job role.

This course has been designed to reflect the future requirements of the electric vehicle industry.

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This is course is designed for someone with little to no electrical experience. The course covers a wide range of electrical equipment testing,

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

EUSR Single Off Single Upskill Course

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This programme opens the door to a brighter future working as an electrician. You’ll start developing essential skills in domestic wiring, fundamental technical theory, Building Regulations, Inspection & Testing and Wiring Regulations.

This qualification is designed for individuals involved in any electrical work.

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

The NPORS N214 Road Roller (Experienced Worker) Test Training Course is aimed at experienced operators who use ride-on rollers for compaction tasks. This course provides refresher training and prepares candidates for the NPORS theory and practical assessments. It covers safe operation, pre-use inspections, working on gradients, and effective compaction techniques. Successful candidates receive the NPORS Operator Card, confirming their ability to operate road rollers safely and efficiently.

The N726 Quick Hitch Awareness (Experienced Worker) Test Training Course is designed for experienced operators who use quick hitch systems on excavators and other plant machinery. The course refreshes knowledge and prepares candidates for the NPORS assessment, focusing on the safe use, inspection, and connection of quick hitch devices. It also highlights common hazards and best practices to prevent accidental releases. Successful candidates receive the NPORS Operator Card with the Quick Hitch Awareness.

The NPORS N205 Rear Tipping Dumper (Experienced Worker) Test Training Course is aimed at experienced operators who use rear tipping dumpers in site operations. This course provides refresher training and prepares candidates for the NPORS theory and practical assessments. It covers safe operation, loading and tipping techniques, driving on various terrain, and machine maintenance. Successful candidates are awarded the NPORS Operator Card, verifying their competence and compliance with safety standards.

The NPORS N204 Forward Tipping Dumper (Experienced Worker) Test Training Course is designed for operators with prior experience using forward tipping dumpers. This course refreshes essential skills and knowledge while preparing candidates for the NPORS theory and practical assessments. Training covers safe operation, loading and tipping procedures, manoeuvring on varied terrain, and daily maintenance checks. Successful candidates receive the NPORS Operator Card, confirming their competency.

The NPORS N016 Micro Excavator 360° (up to 1 Tonne) Experienced Worker Test Training Course is intended for operators with prior experience using micro excavators. This course provides refresher training and prepares candidates for the NPORS theory and practical assessments. Key topics include machine controls, safe operation in confined areas, digging and backfilling techniques, and routine maintenance. Successful candidates receive the NPORS Operator Card.

The NPORS N402 Slinger/Signaller (Experienced Worker) Test Training Course is tailored for individuals with prior experience in slinging and signalling operations. The course provides refresher training and prepares candidates for the NPORS theory and practical assessments. It covers safe slinging techniques, communication methods, load assessments, and working in coordination with lifting teams. Successful candidates receive the NPORS Operator Card, confirming their competency in slinger/signaller duties.

The Training Course is designed for experienced telehandler operators who handle suspended loads. This course prepares candidates for the NPORS theory and practical tests, focusing on the additional risks and control measures required when lifting and moving suspended loads. Key topics include load stability, attachment use, signaling, and safety compliance. Successful candidates are awarded the NPORS Operator Card with the suspended loads endorsement.

The NPORS N107 Lorry Loader (Experienced Worker) Test Training Course is aimed at experienced operators who use lorry-mounted cranes for loading and unloading materials. The course refreshes key skills and prepares candidates for the NPORS theory and practical assessments. Training covers safe setup, use of attachments, lifting operations, signaling, and relevant safety regulations. Successful candidates receive the NPORS Operator Card as proof of their competence.

The NPORS N100 Excavator as a Crane (Experienced Worker) Test Training Course is designed for experienced excavator operators who use the machine for lifting operations. This course refreshes essential knowledge and prepares candidates for the NPORS theory and practical assessments. It covers lift planning, safe slinging, load handling, stability, and compliance with lifting regulations. Successful candidates receive the NPORS Operator Card, confirming their ability to use an excavator safely as a crane.

The NPORS N109 MEWP Scissor (Experienced Worker) Test Training Course is intended for operators with prior experience using scissor lift platforms. The course provides refresher training and prepares candidates for the NPORS theory and practical assessments. Key topics include safe operation, working at height, pre-use inspections, and emergency procedures. Successful candidates are awarded the NPORS Operator Card to certify their competency.

The NPORS N108 MEWP Boom (Experienced Worker) Test Training Course is designed for experienced operators of mobile elevated work platforms (boom type). The course refreshes key safety knowledge and operational skills, preparing candidates for the NPORS theory and practical assessments. It covers safe setup, operation at height, emergency procedures, and equipment checks. Successful candidates receive an NPORS Operator Card as proof of competency.

The NPORS N001 Industrial Counterbalanced Lift Truck (Experienced Worker) Test Training Course is designed for operators with prior experience using counterbalanced forklift trucks. This course prepares candidates for the NPORS practical and theory assessments, ensuring they meet safety, operational, and regulatory standards. Training focuses on refining existing skills, hazard awareness, safe load handling, maneuvering in restricted areas, and daily maintenance checks.

The NPORS N010 Telescopic Handler (Experienced Worker) Test Training Course is aimed at operators with prior experience using telescopic handlers. This course provides refresher training and prepares candidates for the NPORS theory and practical assessments. It covers safe operation, load handling, manoeuvring, stability awareness, and machine maintenance. Upon successful completion, operators receive the NPORS Operator Card, demonstrating their competence and compliance with industry standards.

This module is essential for anyone carrying out civils work in the Openreach network. The target audience for this accreditation is anyone working on the Openreach network including Contract Partners.

Formally known as BB1M. This assessment will test the delegate's knowledge of building modular jointing chambers. This module covers the excavation, base preparation, installation of the modular rings, ironwork and duct entries.

Formally known as CD1. This assessment will test the delegate's knowledge of core drilling jointing chambers. This module covers the core drilling of modular, brick and concrete (reinforced and unreinforced) jointing chambers for the installation of Duct 54, 56 and small ducts.

Formally known as DB1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of Clearing duct blockages.

Formally known as DL1. The module target audience are engineers working on the Openreach network including Contract Partners. This assessment will test the delegate's knowledge of installing Duct 54 and 56. The module covers the installation of single way and 2 way duct only. For laying multi-way duct exceeding 2 ways the operative will require Duct Laying 2 for which the Q021 module is a pre-requisite.

Formally known as FCFW1. This module checks the Delegates understanding & ability to complete frame and cover renewal in the footway of cover no 2, 4, 6,110, 111, cover carriageway 4 & covers precinct using current working practices and quality standards.

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

The full 5 day NRSWA Street Works Operative course is for anyone who wants to undertake physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their competence in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

The full 5 day NRSWA Street Works Supervisor course is for anyone who wants to monitor physical work under the New Roads and Street Works Act 1991. Delegates are required to demonstrate their monitoring in Safe methods of excavation, backfill and reinstatement of modular, flexible and composite surfaces and concrete footways and location and avoidance of underground utilities.

The Location and Avoidance of Underground Services course is also known as Unit 1 or CAT and Genny training and can be undertaken as a one-day course, as a standalone unit on a NRSWA card. Candidates will undertake practical exercises using the equipment and will be observed throughout the day by the trainer. Candidates will also be required to complete a practical assessment and multiple choice test in order to pass the course.

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

This course consists of a questionnaire and practical assessments on the below understanding statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

This unit is designed to allow the candidate to demonstrate the skills and knowledge required to carry out reinstatement using hot-lay bituminous surfacing material.

This course consists of a questionnaire and monitoring delegates while they carry out the practical assessments on the below Monitoring statutory training requirement for placing signs, cones and barriers on public roads and footpaths. Understanding the requirements of the Safety at Street Works and Roadworks code of practice in relation to Traffic Management requirements in roadworks and utility works.

NRSWA re-assessment course is specifically designed as an invigilated examination-only course, adhering to the requirements set by the Highway Authorities and Utilities Committee (HAUC). Once this is completed the candidates Street Works card will be renewed for a full 5 years.

A new National Water Hygiene e-Learning programme can be accessed via XAMS, EUSR's e-Learning system. Employers, trainers and learners will be able to access the scheme online.

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the power industry, both permanent and temporary, at all levels including operatives, supervisors and management.

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the telecommunications industry, both permanent and temporary, at all levels including operatives, supervisors and management.

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the gas industry, both permanent and temporary, at all levels including operatives, supervisors and management.

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. The course is designed for individuals who require access to operational sites within the water industry, both permanent and temporary, at all levels including operatives, supervisors and management.

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

EUSR Category 2 - Implement Safe (Digging) Excavating Practices

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

This course includes refresher training and ACS assessments

This course includes refresher training and ACS Assessments

This course includes refresher training and ACS Assessments

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and Assessment

This course includes refresher training and assessment.

This course includes initial/refresher training and assessments

This qualification is designed for individuals involved in any electrical work.

This programme opens the door to a brighter future working as an electrician. You’ll start developing essential skills in domestic wiring, fundamental technical theory, Building Regulations, Inspection & Testing and Wiring Regulations.

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

Bespoke NAS Gas Trade Test

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

This is course is designed for someone with little to no electrical experience. The course covers a wide range of electrical equipment testing,

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This course is aimed at practicing electricians who wish to gain qualifications in periodic inspection and testing as well as initial verification of new systems

This course has been designed to reflect the future requirements of the electric vehicle industry.

The Safety Health and Environmental Awareness (SHEA) suite of schemes have been developed in collaboration with industry to provide a uniform approach to health, safety and environmental awareness training across the utilities sector, in line with Health and Safety Executive guidelines. It is designed for individuals who require access to operational sites within the gas industry, both permanent and temporary, at all levels including operatives, supervisors and management.

This course includes refresher training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes refresher training and ACS assessments

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

All Smart Meter installers who have successfully completed an NSAP approved training programme from an NSAP approved provider are eligible for an EUSR registration

This course includes initial/refresher training and assessments

This course includes refresher training and assessment.

This course includes initial training and Assessment

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

This course includes refresher training and ACS Assessments

This course includes initial training and ACS Assessments

Bespoke NAS Gas Trade Test

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Overhead Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Pole Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Pole Survey.

This accreditation covers 3 modules, Module 1 training designed to develop the delegates knowledge of the Openreach Underground Infrastructure. Module 2 equips the delegates with the necessary skills to undertake a safe PIA (Physical Infrastructure Access) Duct Survey. Module 3 accreditation access the delegates knowledge by demonstrating the competency required to complete an effective PIA Duct Survey.

The accreditation covers the engineering techniques used to deploy cable and Sub Duct up to a maximum diameter of 25mm within the Openreach underground infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

The module assesses the delegate's knowledge and ability to increase space in the upper pole envelope by moving the top bass step downwards in line with the current PIA terms and conditions and also to understand the new upper envelope of space and its measurement.

The accreditation covers the engineering techniques used to deploy drop cable up to a maximum diameter of 7mm within the Openreach Overhead infrastructure safely from a MEWP only. It also covers the agreed network quality standards associated with PIA (Physical Infrastructure Access) CP (Communication Provider) cable deployment. The accreditation consists of a questionnaire and practical assessment.

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.

This accreditation has been developed to ensure that supervisors and planners who require an awareness of ladders and poles safety are accredited to Industry and National Occupational Standard (NOS). This accreditation is aimed at supervisors and planners working in a telecommunications environment. This accreditation does not cover roof top working.

This accreditation has been developed to ensure that those who work on ladders and wooden poles do so safely following all policies, procedures, and safe working practices.

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation.

This course covers one module: Safe Use of Respiratory Protective Equipment. It provides learners with the skills and knowledge of selection and use of adequate and suitable Respiratory Protective Equipment (RPE) in the workplace, in order to comply with the law.

This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding and skills in the safe use of abrasive wheels.

This accreditation covers one module: Safe Moving and Handling. Learners are provided with the knowledge for safe moving and handling. This accreditation particularly is aimed at those individuals who undertake work in a telecommunication (or similar utility) environment. It also enables learners to gain knowledge of compliance with Health and Safety legislation. The accreditation tests learners knowledge, understanding in Safe Moving and Handling techniques.

The SA006 accreditation provides basic knowledge regarding legislation and dangers associated with safe working in a utility construction environment. precautions required while working in civils.